Equipments (Devices) > RUW200 > Setup

The configuration of the PLC200 is done through the parameter table.

Refer to the parameter manual to check all the product parameters and how to configure them.

There are several ways to update the product parameters:

Changing using the "Online" tab:

•	Connect: Connect to the PLC200 using the Connect Equipment command .

•	Change parameters in the "Online" tab: The "Online" tab of the parameter table will display the current values of the product parameters and will also allow writing to the configuration parameters. Simply write the new value in the parameter.

NOTE!

The writing in the online column is lost if the product is restarted. To ensure that the changes are retained during product restarts, it is necessary to write "1 - Save parameters to Flash" to P204 after making parameter changes.

Changing using the "Write parameters" button in the parameter table:

•	Connect: Connect to the PLC200 using the Connect Equipment command .

•

Change parameters in the "Offline" tab: The "Offline" tab of the parameter table is used to save the default values and/or values edited by the user for the created resource. Any change in this column is not automatically written; it is necessary (after changing the parameters) to use the "Write parameters" button so that all parameters are written to the product.

NOTE!

Writing using the "Write parameters" button is not lost when the product is restarted.

Changing using the "Setup write (parameters)" option when downloading a resource:

•	Change parameters in the "Offline" tab: Change the product settings in the "Offline" tab of the parameter table.

•	Download the resource: Follow the procedure to download a new resource and select the "Setup write (parameters)" option. The parameters will be saved in the product and retained until a new resource is sent with this option selected or the "1 - Save parameters to Flash" command is written to P204.